Integrating occupancy sensors into existing control systems (e.g. BMS)

Flexible connection to various formats

Whenever occupancy sensors are to be integrated into exsting control systems (such as BMS building management systems) there is usually a low voltage power supply available from the control system. In addition, most of these sytems can work with sensors that supply a switching output with small load. For these applications EPV's 24V sensor range is very well suited.

Apart from one special sensor type for this application (ecos PM/24V/5Si) all of the 24V sensors are comonly used. They can work on both AC and DC power supply in a wide range of supply voltages (for the simple sensors without dimming functionality this is 10.8-28V). Instead of an EPV Power Pack, these sensors are directly connected to the existing control system - an EPV Power Pack is not required in this case.

The available outputs for switching signals are Open Collector with max. 30mA load. Using this technique, integration into most building management systems can be implemented.

For dimming and light signals, the 1-10V interface is the same as in the 230V models except for the high voltage separation which is not required in this case. Apart from a maximum load of 10mA this interface and also supply active 0-10V signals with a max. load of 1 mA.

It is also becoming increasingly popular to control air conditioning system with occupancy sensors.

Click here for a more detailed description of how to interface our sensors with building management systems and other controls.

Surface Mounting Enclosure
Article code 101472
* €5,90 * SRP
(€7,02 Incl. tax)
in stock
For surface installation if installation depth is insufficient or installation is not possible (e.g. exposed concrete ceilings).
Surface Mounting Enclosure
For surface installation if installation depth is insufficient or installation is not possible (e.g. exposed concrete ceilings).
* €5,90 * SRP
(€7,02 Incl. tax)
Spring clip
Article code 101683
* €5,90 * SRP
(€7,02 Incl. tax)
in stock
For the installation of occupancy sensors in suspended one-piece ceilings (drywall, acoustic ceilings), in which the standard mounting clip can not be used.
Spring clip
For the installation of occupancy sensors in suspended one-piece ceilings (drywall, acoustic ceilings), in which the standard mounting clip can not be used.
* €5,90 * SRP
(€7,02 Incl. tax)
Cable Adapter KA2 Set
Article code 101947
* €5,90 * SRP
(€7,02 Incl. tax)
in stock
Cable adapter to make the transition from RJ11 and RJ12) to installation cable or individual wires.
Cable Adapter KA2 Set
Cable adapter to make the transition from RJ11 and RJ12) to installation cable or individual wires.
* €5,90 * SRP
(€7,02 Incl. tax)
ecos PM/24V/5Si DIM MASTER for Loxone, Homematic, WAGO, Beckhoff & Co.
Article code 102293
€47,90 * €45,90 * SRP
(€54,62 Incl. tax)
in stock
24V Motion sensor for Loxone, Homematic, WAGO,... Occupancy sensor for smart home systems, occupancy sensing and twilight switch, Open Collector output.
ecos PM/24V/5Si DIM MASTER for Loxone, Homematic, WAGO, Beckhoff & Co.
24V Motion sensor for Loxone, Homematic, WAGO,... Occupancy sensor for smart home systems, occupancy sensing and twilight switch, Open Collector output.
€47,90 * €45,90 * SRP
(€54,62 Incl. tax)