Electrical Connection & Commissioning

Ausgangsignale Bewegung Präsenz Lichtmessung occy Präsenzmelder Smarthome occy supplies you with two signals: 

  1. the motion signal as a high / low level output (100% silent, non-audible transistor output in push-pull setup) with a delay time of approx. 10 seconds. Motion = High. No motion = Low. You can connect this output to the binary input of your control system. 
  2. the measured overall room brightness (lux-level) as a 1-10V Signal, usable actively or passively: 0 Lux = 0V, 1.000 Lux = 10V. 

Max. load on both signals (active & passive): 10mA. 

For the connection to most control systems (e.g. Loxone) no pull-up resistor is required. Connections on powerpack: screw terminals (flex: up to 1.5mm2 / flex: up to 1 mm2

occy elektrischer Anschluss an Smarthome Anlage und Flächenerweiterung mit Slave

occy smarthome motion sensor commissioning and test mode

Commissioning & Test Mode

After you connect the supply oltage the sensor goes into a test mode. For 5 Minuten the green LED lights up whenever motion is detected.

After that, the LED remains off. During normal operation, the sensor does not create any visual or acoustic signal / noise. 

Distance between sensor head and powerpack: up to 30 meters

If required, the power pack can be located far away from the sensor head. For this purpose you can extend the connection between sensor and powerpack (4 core jack/socket cable 3.5mm) up to 30 meters. This is possible in a very simple plug & play fashion with our 7-meter extension cables

Next: Project and image gallery>>

Filters
EPV
24V design PIR occupancy motion sensor occy® Smart Home for Loxone, Homematic, Comexio, WAGO etc.
24V design PIR occupancy sensor / motion Smart Home sensor for Loxone, Homematic, Comexio, WAGO, etc. mini motion sensor, digital passive infrared (digiPIR) technology
* €72,90 * SRP
(€86,75 Incl. tax)
EPV
occy® Smart Home 7m extension cable
4-core extension cable (jack plug to jack socket).

This increases the distance between the sensor head and the Smart Home Powerpack, e.g. if you prefer the Powerpack in close proximity to your control system.
* €10,90 * SRP
(€12,97 Incl. tax)