Add your review
Review Occupancy Sensor ecos PM/24V/5 MASTER
Occupancy Sensor ecos PM/24V/5 MASTER
in stock
Simple 24V Occupancy sensor with FIXED delay time 10 minutes. Up to 5 meter installation height.
2-3 working days. There will be no deliveries from 19 December 2025 (12 noon) up to and including 4 January 2026 due to company holidays. We will be back at your service on 5 January 2026. We wish you a Merry Christmas and a happy start to 2026.
- Buy 5 for €75,47 each and save 3%
- Buy 10 for €73,91 each and save 5%
- Buy 25 for €71,58 each and save 8%
Description
The ecos PM/24V/5 MASTER is a simple occupancy sensors with fixed delay time. The ecos PM/24V is the ideal sensor for applications without daylight and for those applications where you want the lights to come on even when there is daylight available.
- Motion sensing is always active, the sensor does not contain a daylight sensor.
- Fixed delay time
- Potential free relay
- Suitable for up to 12 meter installation height
- Coverage area extension with SLAVE
- Scope of delivery: clip to mount the sensors in false/suspended ceilings.
Downloads:
Data sheet ecos PM/24V/5 MASTER
Related products
-50%
ecos
Occupancy Sensor ecos PM/24V/12 MASTER
Stock clearance: Occupancy sensor with fixed delay time. Two variations available. Up to 12 meter installation height.
ecos
Extension occupancy sensor PM/24V/5 SLAVE. Can be combined with all 24V MASTER sensors
SLAVE sensor for coverage area extension of all EPV MASTER sensors. Per 1 MASTER sensor up to 30 SLAVE sensors can be added.
ecos
230V Power Pack XL DIM
EPV Power Pack XL DIM with On/Off + daylight dimming, high-load relay output 2300VA / 800 A and 1-10V output. Supports all 24V occupancy sensors apart from the 24V/5Si.
ecos
2-into-1 RJ12 Adapters
Used for plugging several 24V sensors together (MASTER / SLAVE) Rule of thumb: Typically 1 unit per SLAVE sensor required.
ecos
Cable Adapter KA2 Set
Cable adapter to make the transition from RJ11 and RJ12) to installation cable or individual wires.
ecos
Spring clip for all ecos sensors
For the installation of occupancy sensors in suspended one-piece ceilings (drywall, acoustic ceilings), in which the standard mounting clip can not be used.
ecos
Surface Mounting Enclosure for ecos sensors
For surface installation if installation depth is insufficient or installation is not possible (e.g. exposed concrete ceilings).