Collection
occy
occy® smart home Design occupancy sensor 24V, Loxone, WAGO, Homematic, Beckhoff, Comexio etc.
24V design PIR occupancy sensor / motion Smart Home sensor for Loxone, Homematic, Beckhoff, Comexio, WAGO, etc. mini motion sensor, digital passive infrared (digiPIR) technology
-14%
occy
occy® KNX Basic Occupancy Sensor
Ultra-small KNX occupancy sensor occy® KNX Basic. With digital PIR technology. 4 elegant installation options for your projects.
DIMMTRONIC
230V Trailing Edge Dimmer 1.000W DIMMTRONIC M1000 3.4
Trailing-edge dimmer for manual dimming (push-button mode) or 1-10V and 0-10V analog input signal dimming.
occy
occy® smart home Design occupancy sensor 24V dry contact, incl.24V Powerpack potential-free
24V design PIR occupancy sensor / motion Smart Home sensor for Loxone, Homematic, Beckhoff, Comexio, WAGO, etc. mini motion sensor, digital passive infrared (digiPIR) technology
-50%
ecos
Occupancy Sensor ecos PM/24V/5T MASTER
Occupancy sensor with adjustable delay time 10 s - 14 m. No twilight switch. Two variations available. Up to 12 m installation height.
ecos
Power Pack DALI
DALI Power Pack supports all 24V occupancy sensors. Requires one x 24V-MASTER sensor. With plug & play up to 30 SLAVES sensors for coverage extension are supported. Supports up to 45 DALI devices. 125 DALI devices may be supported with addional DALI ...
-50%
DIMMTRONIC
PWM LED-Dimmer, 3-channel 1-10V / DMX, 3 x 4A
The DIMMTRONIC LED PWM Dimmer converts up to 3 analogue 1-10V (active or passive) or digital DMX input signals into 3 pulse width modulated output signals.
ecos
Cable Adapter KA2 Set
Cable adapter to make the transition from RJ11 and RJ12) to installation cable or individual wires.
ecos
Power Pack XL DIM
EPV Power Pack XL DIM with On/Off + daylight dimming, high-load relay output 2300VA / 800 A and 1-10V output. Supports all 24V occupancy sensors apart from the 24V/5Si.
ecos
Occupancy Sensor ecos PM/24V/5 MASTER
Simple 24V Occupancy sensor with FIXED delay time 10 minutes. Up to 5 meter installation height.
ecos
Extension occupancy sensor PM/24V/5 SLAVE. Can be combined with all 24V MASTER sensors
SLAVE sensor for coverage area extension of all EPV MASTER sensors. Per 1 MASTER sensor up to 30 SLAVE sensors can be added.
ecos
Occupancy Sensor ecos PM/24V/5L MASTER
An occupancy sensor with additional lightlevel switchoff. Delay time and twilight switch level are adjustable. In two variations available.
ecos
Occupancy Sensor ecos PM/230V/5T
Occupancy sensor with adjustable delay time (no light sensor). Two variations available. This sensor reacts to presence - regardless of how bright the room is. In two variations available, up to 12 meter intallation height.
ecos
Occupancy Sensor ecos PM230V/5L
Small "Allround" occupancy sensor with adjustable delay time and adjustable twilight level switch. Two variations available. Perfect for retrofitting existing non-dimmable lighting. Superior sensitivity due to digiPIR technology. Made in Germany.
ecos
RJ 12 Cable for MASTER/SLAVE connections.
6 meter, RJ12 Cable for connecting several 24V sensors together 1-to-1 straight through cable 6P6C. 100% electrically tested.
occy
occy® Smart Home 7m extension cable
4-core extension cable (jack plug to jack socket).
This increases the distance between the sensor head and the Smart Home Powerpack, e.g. if you prefer the Powerpack in close proximity to your control system.
This increases the distance between the sensor head and the Smart Home Powerpack, e.g. if you prefer the Powerpack in close proximity to your control system.
-50%
ecos
Occupancy Sensor ecos PM/230V/5
Occupancy sensing only (ON/OFF) available in two versions. The ecos PM/230V is the ideal sensor for applications without any daylight and applications where you want artificial light even if you have day light available. Up to 12 meter installation ...
-50%
ecos
Occupancy Sensor ecos PM/24V/5LSa DIM MASTER
Combined occupancy and daylight harvesting sensor.
-50%
ecos
Occupancy Sensor ecos PM/24V/12L MASTER
An occupancy sensor with additional lightlevel switchoff. Delay time and twilight switch level are adjustable. In two variations available.
ecos
Surface Mounting Enclosure
For surface installation if installation depth is insufficient or installation is not possible (e.g. exposed concrete ceilings).
ecos
2-into-1 RJ12 Adapters
Used for plugging several 24V sensors together (MASTER / SLAVE) Rule of thumb: Typically 1 unit per SLAVE sensor required.
-50%
ecos
Occupancy Sensor ecos PM/230V/12
Occupancy sensing only (ON/OFF) available in two versions. The ecos PM/230V is the ideal sensor for applications without any daylight and applications where you want artificial light even if you have day light available. Up to 12 meter installation ...
-31%
AIRCOSAVER
AIRCOSAVER Energy Saver for Air Conditioning Units
The AIRCOSAVER is an intelligent electronic retrofit control unit that adds intelligence to existing air conditioning systems and improves their energy efficiency.
ecos
Spring clip
For the installation of occupancy sensors in suspended one-piece ceilings (drywall, acoustic ceilings), in which the standard mounting clip can not be used.